Why is the Apple TV Remote not Working? Quick-Fix Solutions

If your Apple TV remote is not working and you are worried, even after adopting all the tricks, your Apple TV remote is not working then do not worry because this article will solve your problem today in this article we will tell you. Some tricks to fix the Apple TV remote not working that will be very useful for you.

What Causes an Apple TV Remote Not Working?

There are usually two problems with Apple TV remotes: Battery problems and connection problems. There may be a problem with the battery in the remote, or there may be some other issue that prevents it from connecting to Apple TV. Depending on the cause, the remote may need to be paired, an interference source needs to be removed, or the Apple TV could have failed.

Use the Remote Within the Range

It is possible to throw a signal from the remote control within a certain range. So it is essential that these two IR sensors maintain visual contact in order to communicate effectively. Using the remote will be easier if you are sitting within a 6-meter range of your Apple TV.

Charge Your Remote 

The battery level is difficult to determine at a glance, unlike other devices with touchscreens. You may need to charge your remote if you are experiencing problems. Apple TV remotes can be controlled using either a USB-C or Lightning cable, depending on the model. An adapter or computer is needed to connect the cord.

Reset Your Apple TV Remote

  • For at least five seconds, press and hold the TV/Control Center button (a box icon with a line underneath).
  • When the Connection Lost message appears on your TV, release the buttons.
  • Wait a few seconds until the remote restarts!
  • You will see the message Connected on your TV screen once it appears.
  • Unpair and Re-Pair Your Apple TV Remote
  • Try to point your remote at about three inches away from your Apple TV.
  • Press and hold the Volume Up button for five seconds while pressing Back (or Menu depending on the model). Now your remote has been reset, you can pair it.
  • You will need to place your remote on top of the Apple TV at the time of pairing if prompted.

Use the Apple TV Remote app

With the Apple TV Remote app on your iPhone or iPad, you can control your Apple TV. If Control Center doesn’t include it automatically, you can add it from Settings in a few clicks:

  • Go to Control Center in your iPhone’s Settings.
  • Go to the bottom of the Control Center find Apple TV Remote and then click the add button next to Apple TV Remote.

Here are the steps to set up the Apple TV remote on your iPhone if you’re often wondering why your Apple TV remote is not working:

  • Open Control Center by swiping down from the upper right corner of your screen.
  • Tap on Apple TV Remote
  • You can choose a TV from the top drop-down menu.
  • You will need to enter a four-digit passcode when instructed to do so onscreen.

Factory Reset your Apple TV

Below you will find how to Factory Reset your Apple TV:

  • Go to Apple TV Settings
  • Search reset option and click on the reset option 
  • Simply choose Reset or Update from the menu and follow the instructions on the screen to complete the process.
  • Set up your Apple TV again after it has been factory-restored.

Buy a New Remote (If All Else Fails)

Apple TV Remote Not Working, If your Apple TV remote still doesn’t work, but you’re able to control your TV from your iPhone, there might be a hardware problem. You may want to consider replacing the device or contacting Apple service for additional assistance.

Read Also

MacBook Not Showing Up On AirDrop
How to Turn Off Silent Mode on iPhone Without Switch
How to Refresh Airtag Location

Leave a Comment